Winter Cover / Pool Size 36ft Round / 8 yr Navy Blue
Arctic Armor Above Ground Winter Pool Cover - 8yr. Warranty
Our mid-priced cover has all the strength and durability that will ensure years of protection. The tough no-rip cover material is UV protected to last for years in direct sunlight. Rugged polyethylene stitching is UV protected to remain strong for years. The black underside of the cover retards algae growth. Our big 4-foot overlap keeps the cover on the pool instead of in the water. The cover is held secure on your pool with a heavy duty vinyl-coated cable and winch that is anchored to the cover by rip proof grommets. This durable cover is backed by a 8-Year Warranty (1-YEAR FULL RATED), the cover is navy blue with a black underside.
Arctic Armor Winter Pool Cover - 8 Year
|Winter Cover Options|
|Chemical Closing Kits include everything you need to close your pool this fall. All kits are formulated for specific pool sizes - just order the kit to fit your pool. We offer two types of kits, a chlorine based kit and a non-chlorine based kit. Close your pool properly this fall and insure a sparkling clean pool next spring with Arctic Armor's Winterizing Kit, featuring Blue Wave chemicals. All kits include free pool closing instructions.|
|Cover Clips grip your top rail like a clothespin and hold your cover on tightly. Cover clips keep your above ground pool's cover in place and helps reduce the wear and tear on a winter cover from wind damage.|
|These rugged 16-gauge vinyl Air Pillows absorb freezing water’s pressure and helps protect your pool walls. The Air Pillow also reduces excess rain, snow, and leaves on your winter cover. Use an air pillow under your winter cover and it will also make draining the water off the top of your cover much easier.|
|These handy Wall Bags help hold your cover down in high winds and protect it from wind whip and damage. Our bags are made of heavy-gauge vinyl and are easily filled with water using a garden hose. They are designed to lie on top of the cover around the inside perimeter of your pool. Rugged grommets on top of each bag allow you to fasten them to your covers' cable.|
|The Winter Cover Seal for Above Ground Swimming Pools will help eliminate damage to your winter cover during high winds and harsh winter weather. Easy to install our cover seal only takes minutes to install and can be done by one person. This is a very simple solution to keep the wind from getting under your winter cover and causing damage and premature wear and tear.|
|Cover Pumps are used to remove the water from your pool cover. They are available in manual models where you will have to monitor the pumps progress and unplug it when the water is off. Or you can get an automatic cover pump which senses when water is on the cover and cuts itself on and off automatically. All cover pumps are 110v.|
|Skimmer Cover snap-on closure system protects your skimmer from freeze damage and saves thousands of gallons of water a year. Simply replace your existing skimmer plate with the Aquador fuse plate and snap on the plastic lid.||
||The Skimmer Guard is designed to absorb the expansion of the freeze, allowing your skimmer to last throughout the winter undamaged. Just place the Skimmer Guard into your skimmer to absorb any expansion caused by freezing water. The freezing water will actually compress the Skimmer Guard instead of expanding outward and cracking your skimmer.|
The recommended amount of cover clips for your pool is 72.
This item has been discontinued. We apologize for any inconvenience.
Last Updated: 02/02/2023 04:06 PM - ID:4502