Mesh Safety Cover / Pool Size 14ft  x 28ft  Rectangle
(Click for Larger View)

Mesh Safety Cover / Pool Size 14ft x 28ft Rectangle

Rayner Mesh Safety Cover - Limited Lifetime Warranty



Rayner Pool Covers are individually manufactured in the U.S. using leading Computer Aided Design (CAD) and custom made to fit your pool perfectly. To reduce premature wearing, we fully reinforce both the top and bottom of our covers with polypropylene webbing.

Rayner Safety Pool Covers are manufactured in the U.S. with only the best safety mesh and vinyl materials for a strong, durable and safe pool cover.

All Rayner safety mesh and solid vinyl covers are certified to meet or exceed ASTM F1346-91 specifications.

Click here to view the ASTM Certificate on these covers.


Stainless Steel
Tension Spring


Rustproof Brass Anchor

All Rayner safety mesh and solid vinyl covers are certified to meet or exceed ASTM F1346-91 specifications.

Rayner Pool Covers are secured to the deck surface with rustproof brass anchors which are recessed in the decking to prevent injury and improve aesthetics when not in use. The cover is held taut on the pool with stainless steel tension springs.

If your main concern is for safety, Rayner Safety Mesh cover is the best choice. Rayner Safety Mesh allows all water to drain through, and is absolutely maintenance free. Simply put a Rayner Safety Mesh cover on your pool and forget about it until Spring. Rayner Safety Mesh is 100% polypropylene. It is lightweight and strong, with a bursting strength of 350 Lbs. per square inch.

It is backed by a Limited Lifetime Warranty.

ATTENTION: THIS COVER IS MADE TO ORDER AND IS NOT RETURNABLE!



Your choice of 5 great colors at NO EXTRA CHARGE!!
Click Image to Enlarge


Black


Blue


Chocolate


Gray


Green

 

You Also have your choice of Strap Adjusters NO EXTRA CHARGE!!!
Click Image to Enlarge


D-Rings


Flat Buckles


PLEASE NOTE THAT DIFFERENT MANUFACTURERS CHARACTERIZE SIDE STEPS DIFFERENTLY. SOME SAY LOOKING FROM THE DEEP END WHICH SIDE IS IT ON AND OTHERS GO FROM THE SHALLOW END. PLEASE MAKE SURE THAT YOU ARE USING THE CORRECT STEP PLACEMENT FOR THE COVER OF YOUR CHOICE.

Covers with side steps will require a measuring form to be completed.

ALL STEPS ON STOCK RECTANGLE COVERS ARE 4' X 8'

PLEASE NOTE: Any cancellations on Rayner safety covers must be made within 24 hours.

Your cover will come with approximately 22 anchors and an additional 4 anchors if you have a step section.

Last Updated: 09/12/2024 02:19 PM - ID:3603