The QuickDrain is a simple, easy way to drain your Inflatable Pool or Spa. The Quick Drain uses siphon action to remove dirt and debris. It has no moving parts. Simply insert the suction tube into the pool or spa, shake the tube and the Quick Drain goes to work. It will quickly remove the dirt and debris and remove it through its discharge hose.
The QuickDrain drains 10-12 gallons per minute. It produces so much siphon suction that it will even remove glass, pebbles, sand and leaves.
An extension hose is also available that directs the water up to 24 feet away.
![]() Insert QuickVac into the water. Position discharge hose so it lies below the bottom of body of water being drained. |
![]() Pump QuickVac up and down, with long, fast strokes to establish water flow. To maximize flow, wait a minute and then pump again. Maneuver QuickVac to vacuum debris as it drains. |
![]() When water level is very low, angle tip of QuickDrain flush with floor. Carefully maneuver and watch to insure all of the water is completely drained. |
|
|
|
|
|
Last Updated: 05/08/2012 06:28 PM - ID:2885
Related Terms: Quick Drain