Mesh Safety Cover / Pool Size 16ft 6In x 32ft 6In Grecian
Rayner Mesh Safety Cover-MADE TO ORDER
Rayner Pool Covers are individually manufactured in the U.S. using leading Computer Aided Design (CAD) and custom made to fit your pool perfectly. To reduce premature wearing, we fully reinforce both the top and bottom of our covers with polypropylene webbing.
Rayner Safety Pool Covers are manufactured in the U.S. with only the best safety mesh and vinyl materials for a strong, durable and safe pool cover.
All Rayner safety mesh and solid vinyl covers are certified to meet or exceed ASTM F1346-91 specifications.
Click here to view the ASTM Certificate on these covers.
Rayner Pool Covers are secured to the deck surface with rustproof brass anchors which are recessed in the decking to prevent injury and improve aesthetics when not in use. The cover is held taut on the pool with stainless steel tension springs.
If your main concern is for safety, Rayner Safety Mesh cover is the best choice. Rayner Safety Mesh allows all water to drain through, and is absolutely maintenance free. Simply put a Rayner Safety Mesh cover on your pool and forget about it until Spring. Rayner Safety Mesh is 100% polypropylene. It is lightweight and strong, with a bursting strength of 350 Lbs. per square inch.
It is backed by a Limited Lifetime Warranty.
ATTENTION: THIS COVER IS MADE TO ORDER AND IS NOT RETURNABLE!
Your choice of 5 great colors at
NO EXTRA CHARGE!!
|You Also have your choice of Strap Adjusters NO EXTRA
Click Image to Enlarge
|Determining Step Location For a Grecian Pool|
Center End Step
Left Corner Step
Right Corner Step
PLEASE NOTE: Any cancellations on Rayner safety covers must be made within 24 hours.
Your cover will come with approximately 38 anchors and an additional 4 anchors if you have a step section.
Last Updated: 02/18/2020 12:38 PM - ID:5337